|
TopSaSAFETY
HARNESSES - LANYARDS
- ANCHOR DEVICES -
SAFETY LINES -
ACCESSORIES
Safety Harnesses- Full body harnesses have been designed not only to
conform to the relevant standards but also with the users comfort and safety in
mind.
Many variants are available in our standard range, below are only some as an
example. Please contact us for more information.
 |
BH04055 Pole/work positioning
harness, adjustable shoulder and leg straps with breathable mesh panel,
padded waist and buttock straps, side D-rings for pole strap attachment,
fall arrest extension strap no rear D-ring
|
 |
BH0110 Lightweight
full body fall arrest harness with rear D-ring. Suitable for all
generall fall arrest applications. |
Lanyards-
Energy absorbing lanyards are tested by dropping a 100kg mass a distance of 3.8 metres, generating a force of up to 2040kg. The lanyard must be capable of
reducing this force to below 612kg. This is achieved by
increasing the deceleration distance with the use of
controlled tear webbing which pulls apart at a pre determined load. The end result is much softer impact on both the worker and the structure to which they
are attached.
 |
Lanyards are 100% individually proof loaded
prior to final assembly and feature construction techniques designed to
make visual inspection easier, both during manufacture and in the field |
  |
Retracting Lanyards allow mobility up to 2.5 metres.
Fall Arrest & Recovery Block 3 way winch up/down mechanism and fall
arrest capability. |
Anchor devices - For use in horizontal applications. Easily and
quickly deployed with incremental adjustment and locking via the push pin. Will slide along
an "1" beam allowing
horizontal movement with total security. Suits beams from 90mm to 304mm
 |
Clamping vertical beam anchor clamps to
vertical beams via the adjuster and locking nuts. The D-ring swivels,
allowing offset orientation in all directions. Ideal for attachment of
temporary horizontal static lines. Suits beams from 102mm to 406mm |
 |
Permanent Anchor Points manufactured form 316 stainless
steel and is available in kit form including flashing kit. Can be fixed
to "C" or "Z" perlins in most cases from the top of the roof.
Installation can be configured to give continuous rope line connection. |
Safety Lines -
Horizontal Webbing Safety Line an easily deployed 20 meter static
line gives users the benefit of horizontal mobility and total portability
|
Horizontal rope safety line 20 meter x 16mm rope safety line
complete with rope tensioner, 2 round slings, 2 safety shackles and
carry bag. |
 Vertical
Safety Line 20 metre x 16mm polyester rope line complete with removable
automatic rope grab and locking snap hook |
Accessories - Many accessories available
such as:-
Gear Bags |
 
Oval Karabiner - Scaffold Hook |
Safety Shackles |
| 
